Lutron® LRF2-OCR2B-P-WH

• Auto-on low-light feature will turn lights on automatically only if there is less than approximately 10 Lux (1 fc) of ambient light
• Uses clear Connect® technology
• Passive infrared motion detection with exclusive Lutron® XCT™ Technology for fine motion detection
• 360 deg coverage ranges from 324 to 676 sq ft, depending on mounting height
• Simple and intuitive adjustments available for timeout, auto-on, and activity settings
• Supports advanced occupancy features, such as dependent occupancy groups and customizable occupied/unoccupied presets in some systems
• Multiple sensors can be added for extended coverage
• Lens illuminates during test mode to verify ideal locations
• Front accessible test buttons make programming easy
• Requires one CR 123 lithium battery, 10-year battery life
• Non-volatile memory
• Local load controls must be located within 60 ft line of-sight, or 30 ft through walls, of a sensor
• 324 to 676 sq-ft at 12 ft Mounting Height

Lutron® Radio Powr Savr™ occupancy/vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat (IR radiation of 9.5 um) from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming and switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings potential along with ease of installation.

Lutron® Radio Powr Savr™ Occupancy sensor, Wireless, Series: Energi TriPak®, 324 to 676 sq-ft Coverage, 360 deg Viewing, 1/5/15/30 min Delay, Ceiling Mount, 32 to 104 deg F, White, 91 mm H x 91 mm W x 29 mm D