BURNDY® BWB680IG

• Easy installation
• Placed out of the way on the side wall of the skimmer below the basket
• Elastic or hard to grip insulations

NEC 680.26(C) states - "An intentional bond of minimum conductive surface area of 9 in shall be installed in contact with the pool water. This bond shall be permitted to consist of parts that are required to be bonded in 680.26(B)". In order to comply with this requirement BURNDY® is offering the BWB680 Series. Made of noncorrosive stainless steel, the BURNDY® water bonding kit maintains constant contact with pool water to ensure that the pool is effectively bonded at all times. BURNDY® BWB680 Series is one of the few and the most user friendly, products on the market that complies with this code. Other products are placed in the plumbing, which is not always in contact with the water and therefore does not meet the code. Since the BWB680 Series is placed in the skimmer, it is always in contact with the water.

BURNDY® Pool Water Bonding Kit, Copper, 4 in L x 2.92 in W x 1.06 in H