Intermatic® EK4736S

• Non-drift silicon light sensor with IR filter
• DC relay with zero-crossing circuitry for extended life
• Conformal coated PCB
• Exceeds 10,000 ON/OFF switching cycles
• Fail ON mode
• Ideal for single or multifixture HID and LED installations (up to 1,650 W at 277 VAC)
• 255 J MOV surge protection element
• 1/2 in-14 NPSM threaded stem fits standard outlet boxes and wall packs for a minimum installation hole size of 7/8 in diameter
• 18 AWG wire leads

The EK4236S and EK4736S are electronic photo controls that come with a swivel arm for easy reorientation of the photo control after installation. they fit standard 1/2 in knockouts in standard outlet boxes and wall pack lighting fixtures. they are made with uv stabilized, high impact, plastic housing that stand up to outdoor environments and feature silicon light sensors with zero-crossing circuits to provide a long service life.

Intermatic® Stem and Swivel Mounting Photocontrol, Electronic, LED Fixture, 105 to 305 VAC, 6 A, 50/60 Hz Frequency, 1000 W Tungsten, 1800 VA Ballast, 2 to 5 s Timing, 18 AWG Wire, Solid State Photo/Silicon IR Filtered Sensor, 1.5 FC Turn On/2.25 FC Turn Off Sensitivity, NEMA 4/10 Enclosure, Environmental Conditions: -40 to 158 deg F Operating Temperature, 1000 Cycles Operating Cycles, Stem Mounting, Plastic, Gray, 2.25 in H x 1.3 in W x 1.24 in D Dimensions