Lutron® DVRF-5NE-WH

• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
• Load controls always operate locally and do not require system control
• Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored
• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD, DVRF-5NS, and DVRF (-6L, -5NE) use conventional 3-way wiring
• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD, DVRF-5NS, and DVRF (-6L, -5NE) can be used with a mechanical switch in 3-way applications
• DVRF (-6L, -5NE) and DVRF-5NS can also be wired with an accessory switch, DVRF-AS
• Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately
• Lutron Claro wallplates snap on with no visible means of attachment
• Requires a 1-gang U.S. wallbox. 3-1/2 in (89 mm) depth recommended, 2-1/4 in (57 mm) depth minimum1
• PD- models use green status LED(s) to indicate load status
• DVRF (-6L, -5NE) uses a white soft glow light bar and the DVRF-5NS uses a white status LED to indicate load status
• PD-FSQN provides 4 quiet fan speeds plus OFF for a single ceiling fan
• Claro Smart accessory switches (DVRF-AS) control Diva Smart dimmers and switches from additional locations and do not directly control the load

The Lutron Diva smart ELV+ dimmer for Caseta is the perfect dimmer for nearly any residential light source – overhead, undercabinet, toe kick, or track lighting. The Diva smart ELV+ dimmer switch works with up to 250W of dimmable LED, 500W of electronic low-voltage (ELV)/ incandescent/halogen, or 400Watt of magnetic low-voltage (MLV). A neutral wire connection is only required for ELV load types, for other load types such as LED, MLV, and incandescent, a neutral wire connection is optional; a 10-Watt minimum load required for all load types.       This dimmer is pre-programmed to reverse phase for ELV, however the dimmer’s phase selectable output can be changed to forward phase for MLV with simple button-press programming directly on the dimmer or the Lutron app. Diva smart dimmers for Caseta systems are designed with the look of Lutron Diva LED+ dimmers and match existing paddle style dimmers and switches for a classic look throughout any home. The Diva smart dimmers feature an on/off paddle style switch and a captive slider to raise/lower lights to a preset light level. The soft glow lightbar indicates the current status and light level of the dimmer, which can also be used to locate the dimmer in the dark. Similar to the Diva smart dimmer, ELV+ Diva smart dimmers have flexible wiring options and can be wired in single pole or multi-location applications. Create a new 3-way or replace an existing one with the Diva smart dimmer switch. Pair a Pico wireless remote to your dimmer switch and mount the Pico to the bracket on almost any surface - no cutting holes or pulling wire required (remote and bracket sold separately). Use Claro smart accessory switches (DVRF-AS) or existing switches for 3-way applications (for 4-way circuits, Claro accessory switches are required). Activate Caseta dimmers to the Lutron Smart Hub (L-BDG2-WH/ L-BDGPRO2-WH ) for advanced features like schedules, timers, scenes, and sync with voice assistants (Alexa, Siri, or Google) to control lights. Available in 6 gloss colors ; coordinating wall plate and other accessories sold separately.

Lutron, DVRF-5NE-WH, Dimmer Switch, 3-Way Multi-Location, 120 V, 4.16 A, 250 W Power, 50/60 Hz Frequency, 1 Pole, CFL/Halogen/Incandescent/LED Lamp, Dimmer Start, Operation Mode: Slide, Rocker Control, Wall Mounting, 32 to 104 deg F, Resin, White, 4.5 in H x 3.375 in W x 2 in D Dimensions