Lutron® RRD-W6BRL-WH

• At the press of a single button, lights fade on or off to desired levels and shades/draperies open or close to desired positions
• Light levels and shade or drapery positions can be fine-tuned by pressing and holding the raise/lower buttons
• Programmable to select scene or room preset levels or positions
• Adjustable backlight intensity
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation
• Use an IR remote to select the same programmed rooms, scenes and raise/lower buttons as the keypad (-W5BRLIR only)
• Configurable raise/lower selection: Last button or IR room/ scene (default) - devices controlled by the last button pressed or last IR room/ scene selected will raise/lower- double-tap - devices controlled by a double-tapped button will raise or lower
• Prepaid engraving included Redeemable for one engraved replacement kit
• 120 VAC 50/60 Hz 0.5 A 0.6 W
• 32 to 104 deg F, 0% to 90% humidity, non-condensing, indoor use only
• Communications: Wall-mount designer keypads communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
• Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored
• Requires a US wallbox 3-1/2 in deep recommended, 2-1/4 in deep minimum for mounting
• Wall-mount designer keypads require a neutral wire connection

RadioRA 2 is a wireless total home control system. This energy-saving system gives you the ability to adjust the amount of daylight and electric light (using light controls and automated shades) as well as temperature in a single room or throughout your whole home. The system also turns off standby power to small appliances when they're not in use.

Lutron® Designer Keypad, Specifications: 120 VAC