REVCO 1266

• Easier wire pulling and pushing: The diamond-shaped interior pattern and Silverslick® coating help reduce friction when pulling or pushing wire through the EMT conduit.
• Smooth interior finish: The Silverslick® coating stays hard and smooth in different jobsite and climate conditions, helping protect the conduit during use.
• Faster, more accurate bending: Inch-Mark® and Guide-Line® markings help electricians measure and bend conduit without relying on a separate ruler.
• Easy to bend: Made from high-ductility steel to support clean, controlled bends with less kinking, wrinkling, or splitting.
• Built for jobsite durability: EMT conduit is impact-resistant, non-combustible, compatible with concrete, and made to resist cracking, flaking, and damage from severe bending.
• Ready for future wiring changes: EMT can support future wire changes or upgrades over the life of the building.
• Grounding and shielding support: Steel EMT helps protect wiring systems and can provide electromagnetic interference shielding for nearby electrical and electronic equipment.
• Recyclable steel construction: Steel conduit can be recycled at the end of its service life.

Nucor® tubular product Electrunite® Electrical Metallic Tubing (EMT) is designed with the user in mind. Beside being the easiest electrical conduit to bend currently available in the marketplace, proprietary features on Nucor® tubular product small diameter EMT, such as Inch-Mark® and Guide-line®, help reduce bending and measurement error during installation. Large diameter size of Nucor® Tubular Product EMT offer an advantage to job where weight is a key factor in designing an electrical wiring system. Because of its thinner wall, large EMT weigh approximately 40 percent less than similar sized Galvite® electrical rigid metal conduit steel (Galvite® ERMC-S). Thinner wall also provide more than 20 percent extra interior space for wiring when compared to identically sized Galvite® ERMC-S. This, in turn, allow Nucor® tubular customer to save on shipping and overall installation cost. Nucor® tubular Product EMT is manufactured from high quality, flat rolled steel that is uniquely formulated for its high malleability. After forming and welding, the tubes receive a satin smooth, corrosion-resistant zinc coating courtesy of Nucor® tubular product exclusive electro-galvanizing process. A final passivation layer added to the product further strengthens its corrosion resistance properties.

1 in EMT Conduit, 10 ft, Electro-Galvanized Steel

Electrunite® EMT conduit is built for fast, clean electrical installations. This 1 in, 10 ft electro-galvanized steel tubing is designed to be easy to bend, smooth for wire pulling, and durable enough for everyday jobsite use.

The Silverslick® interior coating and diamond-shaped ID pattern help reduce friction when pulling or pushing wire. Inch-Mark® and Guide-Line® markings help electricians measure and bend EMT more accurately, saving time and reducing mistakes during installation.

Made from high-quality flat rolled steel, this EMT conduit has a corrosion-resistant electro-galvanized finish and a smooth surface for reliable wire protection and routing.