Schneider Electric LC1D80G6

• Designed to control and provide overload protection to motors rated upto 100 hp at 480 VAC or 125 hp at 600 VAC, TeSys™ D meets your needs for a majority of motor starter applications
• New TeSys™ D green increase TeSys™ D range with a new electronic coil with up to 80% less consumption than TeSys™ D standard AC or DC coil
• TeSys™ D green contactor simplify your maintenance services with 90% less references needed
• TeSys™ D green contactor associated with TeSys™ LR9D electronic overload relay reduces heat generation and energy consumption upto 50%
• High fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR
• All contactors include built-in auxiliary contacts
• All screw connections have IP20 finger safe terminals with both north American and international terminal markings
• Designed for perfect integration in control systems
• Can be used to create motor starters for any type of application
• 20 hp 200/208 VAC 50/60 Hz 3 ph, 7.5 hp 115 VAC 50/60 Hz 1 ph, 15 hp 230/240 VAC 50/60 Hz 1 ph, 25 hp 230/240 VAC 50/60 Hz 3 ph, 60 hp 460/480 VAC 50/60 Hz 3 ph, 60 hp 575/600 VAC 50/60 Hz 3 ph, without built-in suppressor module

Schneider Electric TeSys™ D IEC Contactor, Series: LC1D, 120/690 VAC, 300 VDC Coil, 80/125 A Maximum Load Current, 22 VA Coil, 3 Pole, 25/400 Hz Frequency, 5.1/3 to 12.5 W Wattage, Non-Reversing Contact, 3NO Contact Configuration, 1 NO-1 NC Auxiliary Contacts, Screw Clamp Connection, Screw Clamp Terminal, Open Enclosure, 3600 Cycles/hr Operating Cycles, -4 to 70 deg C Operating, Rail/Surface Mounting, 85 mm W x 130 mm D x 127 mm H Dimensions