Signify Luminaires 1002P1

• 1 x PAR38 medium E26 bulb shape
• 20 AWG galvanized steel mounting frame
• Accommodates all ceilings up to 1 in THK
• Push-in/twist-out clips hold reflector flush to ceiling
• Four slots are positioned 90 deg apart to simplify alignment
• AWG 14 galvanized steel junction box
• 75 deg C through branch circuit conductors
• Integral cable clamps permit attachment of non-metallic Romex® or armored cable without need of additional connectors
• AWG 16 galvanized steel mounting bars
• Attaches to wood joist without need of accessories
• 13 in L bars extend to 27 in with integral nailing tabs
• Impact extruded aluminum or galvanized steel socket housing
• Porcelain medium base, nickel plated screw shell socket
• Pre-wired with AWG 18 SF1 leads to junction box
• Thermal protector insulation must be kept 3 in away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat
• Dimming capability

Lytecaster® 1002P1 5 in Non-IC Standard Frame-In Kit is made of 20 ga galvanized steel and will accommodate existing ceilings up to 1 in THK. Non-IC designation requires that insulation must be kept a minimum of 3 in away from housing. Lamp type and wattage dependent on frame-in kit/trim combination. A complete fixture includes a frame-in kit and a trim kit, sold separately.

Signify Luminaires Lightolier Lytecaster® Frame-In Kit, Non-IC Round Standard, 120 VAC, 5-1/8 in Ceiling Opening, 75 W Lamp, 1 Lamps, Ceiling/Recessed Mounting, 5 in Diameter, For Use With: Recessed Downlight, 14.19 in Height, 12-3/4 in Width, 7-1/2 in Depth, Galvanized Steel Housing Material