Signify Luminaires 2002P1

• 1 x PAR20 medium E26 bulb shape
• 20 AWG galvanized steel mounting frame
• Accommodates all ceilings up to 1 in THK push-in/twist-out rotoclips hold reflector flush to ceiling
• Junction box 14 AWG galvanized steel, 75 deg C through branch circuit conductors
• Integral cable clamps permit attachment of non-metallic Romex® or armored cable without need of additional connectors
• 16 AWG galvanized steel mounting bars
• 13 in L bars extend to 27 in with integral nailing tabs
• Aluminum or galvanized steel socket housing
• Porcelain medium base, nickel plated screw shell, Pre-wired with 18 AWG SF1 leads to junction box
• Thermal protector insulation must be kept 3 in away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat
• 9.6 in L
• Dimming capability

Lytecaster® 2002P1 3-3/4 in Non-IC Standard Frame-In Kit is made of 20 ga galvanized steel and will accommodate existing ceilings up to 1 in THK. Non-IC designation requires that insulation must be kept a minimum of 3 in away from housing. UL listed for damp locations. Overall height based on trim option selected. Lamp type and wattage dependent on trim kit and frame-in kit combination per attached manufacturer spec sheet. A complete fixture includes a trim kit and frame-in kit, sold separately.

Signify Luminaires Lightolier Lytecaster® Frame-In Kit, Round Standard, 120 VAC, 3-11/16 in Ceiling Opening, Incandescent Lamp, 50 W Lamp, 1 Lamps, Ceiling/Recessed Mounting, 3-3/4 in Diameter, For Use With: 2005, 05WH, 08 2010, 11, 12, 13, 13BK, 13WH Reflector Trim, Recessed Downlight, 14.7 in Height, 13.2 in Width, Galvanized Steel Housing Material