InvisiLED® EN-24100-RB2-T

• 1 W minimum load
• Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques
• Intrinsically safe, class 2 transformers permit no greater than a 5 A current be drawn
• Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
• Drop down to a smaller gauge wire if space in fixture does not permit secure connection directly with the non-metallic sheathed cable
• Dimming with electronic low voltage dimmers
• Built in auto-reset, soft start, short and overload circuit

This class 2, UL and cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 A of current to be drawn on each compartment. Enclosure cover is easy to remove. Transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers do not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1 W to allow the use of LED products. May be dimmed using an electronic low voltage dimmer.

InvisiLED® Electronic Transformer, Class 2 Remote Enclosed, 120 VAC Input, 24 VAC Output, 96 W Wattage, 50/60 Hz Frequency, Black, 6-5/8 in L x 1-5/8 in W x 1-1/8 in H Dimensions